HVAC Exam Prep / Kentucky
HVAC — KY
How to Get Your HVAC License in Kentucky
To work as a licensed HVAC technician in Kentucky, you need EPA 608 federal certification plus the state HVAC Contractor License issued through Kentucky Department of Housing, Buildings and Construction. Here's everything you need to know.
License Details
- State License Name
- HVAC Contractor License
- Licensing Body
- Kentucky Department of Housing, Buildings and Construction
- Exam Provider
- PSI Exams
- Passing Score
- 75%
- Exam Fee
- $60
- Federal EPA 608
- Required — Universal recommended
Note: Always verify current requirements with Kentucky Department of Housing, Buildings and Construction.
How Kentucky Compares Nationally
- Kentucky's $60 HVAC exam fee sits below the national median of about $65.
- The 75% passing bar is higher than the 70% most states require, so build in extra margin.
- EPA 608 certification is federally required nationwide — the same core exam applies in Kentucky as everywhere else, so your prep travels with you.
Kentucky HVAC Notes
EPA 608 required. Kentucky requires a statewide HVAC contractor license with a 75% passing score.
About the EPA 608 Exam
The EPA 608 Universal exam has 100 questions across 4 sections (Core, Type I, II, III). You must score 70% on each section independently. The Core covers environmental regulations, leak rates, and safe refrigerant handling. Types I–III cover equipment- specific recovery and service procedures. The exam is closed-book.
How to Become a Licensed HVAC Technician in Kentucky
- 1
Get your EPA 608 Certification
EPA 608 is a federal requirement for anyone who purchases, handles, or recovers refrigerants. You must pass the Core section plus at least one Type (I, II, or III) — passing all four earns Universal certification. Universal certification is strongly recommended for HVAC technicians working on residential and commercial systems.
- 2
Gain field experience (Kentucky requirement)
Kentucky HVAC licensing typically requires documented field experience under a licensed contractor. Most states require 2–5 years of hands-on experience. Keep records of your work hours and employers — you will need to submit these with your license application.
- 3
Pass the state or local trade exam
The HVAC Contractor License requires passing a written trade exam administered by PSI Exams. The exam covers HVAC systems, refrigerant handling, local codes, and safety regulations. Passing score is 75%. Exam fee is $60.
- 4
Apply for your license
Submit your application to Kentucky Department of Housing, Buildings and Construction with proof of experience, EPA 608 certification, exam results, and any required insurance or bond documentation. Processing times vary — apply early and keep copies of all submitted materials.
- 5
Maintain your license
Most HVAC licenses require renewal every 1–3 years with continuing education (CE) hours. Stay current with new refrigerant regulations (particularly HFC phase-downs under the AIM Act) and updated equipment standards to maintain your license without interruption.
Try it free — no signup, instant feedback
Answer a few HVAC / EPA 608 questions now
HVAC / EPA 608 · Question 1 of 5
What is the primary function of the stratospheric ozone layer?
Pick an answer to see the explanation + an instant AI breakdown.
Start on the web
Practice for EPA 608 before you book the exam
Use this Kentucky licensing guide to understand the steps, then drill Core, Type I, Type II, and Type III questions in your browser. Web access and native app purchases are separate, so this page sends website traffic to web practice first.
Kentucky HVAC / EPA 608 Exam — Frequently Asked Questions
What license do I need for HVAC in Kentucky?
In Kentucky, HVAC technicians need the HVAC Contractor License issued by Kentucky Department of Housing, Buildings and Construction. All technicians who handle refrigerants are also required to hold an EPA 608 certification regardless of state licensing requirements. The exam fee is $60 with a passing score of 75%.
Is EPA 608 required in every state?
Yes. The EPA 608 certification is a federal requirement for all HVAC technicians who purchase, handle, or recover refrigerants. It is required in every U.S. state and territory, regardless of local state licensing requirements.
What is the best app to study for the EPA 608 exam?
VoltExam offers EPA 608 prep on the web with practice across Core, Type I, Type II, and Type III, plus a built-in refrigerant charge calculator. Start free in your browser at https://www.voltexam.com/study/hvac. Native iOS and Android apps are separate purchases for offline mobile study.